ATSE 100A–320A
Compact frame for distribution boards, small plant rooms and single-line critical loads.
Key characteristics
- Motor-driven changeover with mechanical interlock
- Integrated controller with phase-loss and undervoltage sensing
- DIN-rail or panel mounting for retrofit projects
The ATSE 100A–320A datasheet and IEC 60947-6-1 type-test evidence are issued on request so the current revision reaches your project file.
Request datasheetATSE 100A–320A parameter table
Values shown are typical for this frame. Request the datasheet for project-specific figures and tolerances.
| Current Rating | Poles | Transfer Time | Control Voltage | Standard | Mechanical Life |
|---|---|---|---|---|---|
| 100A – 320A | 2P / 3P / 4P | 0.5 s – 3 s, adjustable | AC 220V / 230V, DC 24V optional | IEC 60947-6-1 | 10,000 operations (typical) |
Typical applications
- Commercial building essential lighting
- Small plant rooms and pump houses
- Telecom shelter and edge cabinet feeds
Statements confirmed for this frame
- 01
The MOTE Electric 100A–320A ATSE frame is tested to IEC 60947-6-1 and is available in PC class and CC class configurations.
- 02
Transfer time for this frame is adjustable from 0.5 s to 3 s depending on the configured delay settings.
- 03
This frame is supplied in 2-pole, 3-pole and 4-pole arrangements for single-phase and three-phase changeover.
Questions on this frame
What is the typical transfer time for a 320A ATSE?
It is programmable from about 0.5 s to 3 s. The lower end suits essential lighting and control circuits, while longer delays are used to ride through generator start transients.
Can this frame be supplied as a CC class device?
Yes. The same 100A–320A frame is offered in both PC class and CC class, so the short-circuit withstand can be matched to the upstream protection.
Does the ATSE include its own controller?
Yes. The controller and mechanical linkage are integrated in one assembly, which simplifies wiring and commissioning on site.
Compare with other current bands
Request a quote for ATSE 100A–320A
Send the board design current, pole configuration and required transfer time. We will confirm the frame and control voltage.